English translation for "bonded structure"

胶合结构件
胶接结构
粘结强度

Related Translations:

bond bonded:  束缚的接合的结合的保税的

bonds:  邦兹公司债镣铐, 监禁债券，债票债券市场，债市

bonder:  邦德尔丁砖焊接工焊接器接合机接合器接头砖结合器结合物连接接合连接器，耦合器连接石锚石热压焊接机压焊机造型粘土粘合机粘合剂粘结剂

bonded:  adj.1.有债券作保证的；有抵押的，有担保的。2.(货物)存入[关栈]待完税的。3.(织物)多层黏合的；【化学】化合的，结合的。

bond:  短语和例子bond1n.1.结合(物)，结合力，黏合(剂)，联结。2.束缚，羁绊； 〔pl.〕 拘束；镣，铐。3.契约，契约义务，盟约；同盟，联盟。4.证券，公债，债券；借据；证券纸；(付款)保证书；保证人；【商业】海关扣存(待完税)。5.【化学】键；【电学】耦合，固定；连结器，接头；【头】砌合；(砖等的)砌式；【铁路】轨条接线；【机械工程】焊接。短语和例子the bond

bonding:  冰冻胶结搭铁线焊接连接，搭接焊线；引线连接加固和接地胶合接驳；连接接合；通电搭接结点 结合 低电阻连接 成键的 粘合 粘结 砌合 键合 保证单连接件密着母子结契约熔接粘结，压焊，结合，搭接忠诚保险砖石砌体砌合

Example Sentences:

	1.	In the valence bond treatment, explicit recourse is made to classical, localized bond structure . 价键法明显依赖经典的定域结构。
	2.	Application of prestressed concrete with bond structure for construction 有粘结预应力框架结构在工程中的应用
	3.	Stress analysis for tangential bonded structure of pressure vessel and pipe based on finite element method 压力容器与切向接管结构应力三维有限元分析及强度评定
	4.	The conditions forming strong bond structure transition zone between the coating and diamond are obtained 该技术还可使金刚石表面涂层与金刚石之间形成强键结构过渡层。
	5.	Adhesives - guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures 粘合剂.胶粘结构的制造和适合这种结构风险评估申报程序的指南
	6.	The properties of cn thin films such as their morphology , component , crystal structure and the bonding structure and the relation between those properties and the gas - phase reaction parameters were discussed , showing that the deposition of p - c3n4 thin film is the compete result of various reaction processes in the dynamics balance conditions ; the process of cn films depo sition is diagnosed in situ through the optical emission spectra technique , , the effects of experimental parameters on the concentration of the precursors and the gas - phase reactions in the plasma have been obtained ; the main reaction precursors for film deposition identified ; the relation between the characteristics of cn thin films and the reaction process in the plasma is analyzed . the cn thin films deposition under different substrate temperatures in high pressure pe - pld shows that the si atom of the substrate has participated the cn films growth process , based on this the growth mode of cn thin films on the si substrate is proposed . the further experiment of cn thin films deposition on si substrate scratched by diamond as well as covered with fe catalyzer has been attempted , which indicates that changing the dynamics conditions of the surface reaction can alter the growth characteristic of the cn thin films and can enhance obviously the films growth rate 采用pld技术进行了碳氮化合物薄膜沉积，得到了含氮量为21at的cn薄膜；研究了衬底温度和反应气体压强对薄膜结构特性的影响，给出了cn薄膜中n含量较小、 sp ~ 3键合结构成分较少和薄膜中仅含有局域cn晶体的原因；引入脉冲辉光放电等离子体增强pld的气相反应，给出了提高薄膜晶态sp ~ 3键合结构成分和薄膜的含n量可行性途径；应用pe - cvd技术以ch _ 4 + n _ 2为反应气体并引入辅助气体h _ 2 ，得到了含n量为56at的晶态cn薄膜；探讨了cn薄膜形貌、成分、晶体结构、价键状态等特性及其与气体压强和放电电流的关系，证明了- c _ 3n _ 4薄膜沉积为满足动力学平衡条件的各种反应过程的竞争结果；采用光学发射谱技术对cn薄膜生长过程进行了实时诊断，得到了实验参量对等离子体中活性粒子相对浓度和气相反应过程的影响规律，给出了cn薄膜沉积的主要反应前驱物，揭示了cn薄膜特性和等离子体内反应过程之间的联系；采用高气压pe - pld技术研究了不同衬底温度条件下cn化合物薄膜的结构特性，揭示了si原子对薄膜生长过程的影响，给出了si基表面碳氮薄膜的生长模式；在金刚石研磨和催化剂fe处理的si衬底上进行cn薄膜沉积，证明了通过控制材料表面动力学条件可以改变碳氮薄膜结构特性，并可显著提高晶态碳氮材料的生长速率。
	7.	In this paper , for the bonding between the sling screw - thread - based and composite hull based on the underwater weapon composite , the bonding structure design , process design and leakproof technology between the load - bearing metal parts and composite hull are studied . with the further investigation on tensile test of the sling screw - thread - based the common technology of bonding between load - bearing metal parts and composite hull is obtained , which establishes the experiment and theory base for the technology of underwater and deepwater weapon in china 本文以水下兵器为背景，以某型号雷体吊耳螺纹座与复合材料壳体的胶接为研究对象，着重进行了金属承力件与复合材料壳体的胶接结构设计、工艺设计、胶接防渗技术的研究，并进行吊耳螺纹座拉力试验研究，最终获取了水下兵器用金属承力件与复合材料壳体连接形式的共性技术。
	8.	Sio2 optical anti - reflective thin films with micropores were prepared with esam method . the optical properties of pdda / sio2 complex films against the changes in temperature in the processof heat treatment were studied . after heat treated at 520 c , the light transmittance at certain wavelengths of the thin improved greatly . the chemical bond structures of the optical thin films was studied with ft - ir , and surface analysis of the thin films was carried out using xps and their anti - scratching performances were studied 用esam法制备了sio _ 2多孔光学增透薄膜，研究了pdda sio _ 2纳米复合薄膜在热处理过程中光学性能随温度的变化规律，发现520热处理后一定波长下的光透过率大大增强；用ft - ir研究了热处理后的薄膜的组成，用xps进行了表面分析，研究了薄膜的耐机械擦伤强度，发现1 ~ #薄膜的耐机械擦伤强度较小，甚至小于相应的pdda sio _ 2纳米复合薄膜的耐机械擦伤强度，而2 ~ #薄膜的耐机械擦伤强度则大大增强，即使用刀片平刮也只略有损伤。
	9.	Due to its nanosize and unique bonding structure , carbon nanotubes have many outstanding properties which are reflected in the following five aspects : mechanics properties , electrics properties , field emission , hydrogen storage and electrochemistry properties of carbon nanotubes 碳纳米管由于其纳米尺寸和独特的成键结构，使得它具有许多优异的性能。这些优异的性能主要体现在五个方面：碳纳米管的力学性能、电学性能、场发射性能、氢存贮、以及碳纳米管的电化学性能。
	10.	Bonding structure and plastic : maxxon all the joints size lap , to adopt additional protection bao - belt take overlap joints used in combination of both methods and closure tape strengthen the protection , and it is designed specifically for marine use , this design yachts given stern plate on the floor of the high durability 粘合结构和胶： maxxon的接缝是全部尺寸搭接，为了额外的保护采用保强带在搭接缝内采用重迭方法并结合内外封胶带做加强保护，并且它的设计是专为航海使用的，这种设计赋予游艇艉板的地板部分极高的耐用性。

Similar Words：

"bonded store" English translation, "bonded store list" English translation, "bonded stores" English translation, "bonded strain gage" English translation, "bonded strain gauge" English translation, "bonded student" English translation, "bonded surface" English translation, "bonded synthetic fabric" English translation, "bonded synthetic fiber fabrics" English translation, "bonded system" English translation